’07 HIGHLANDER_U (L/O 0608)
53
2007 HIGHLANDER from July ’06 Prod. (OM48682U)
To flatten the seatbacks, do the follow-
ing:
1. Hold the center of the lever and pull
it up, sliding the second seat to the
rear−most position. Then pull the
seat forward slightly until it locks.
2. Remove the head restraint. Push the
seat position adjusting switch for-
ward to slide the front seat to the
front−most position.
3. Move the seatback angle adjusting
switch backward to flatten the seat-
back.
After returning the seat to its original
position, be certain to replace the head
restraint.
Flattening seatbacks
(power seat)
To Next Page
Loading...
