’07 Rav4_U (L/O 0608)
246
2007 RAV4 from July ’06 Prod. (ON42621U)
Select phone
Push the talk switch and say [Select
phone], or turn the “AUDIO CONTROL”
knob until [Select Phone] is displayed and
push the knob.
For further details on selecting a phone,
see page 244.
Change name
Push the talk switch and say [Change
name], or turn the “AUDIO CONTROL”
knob until [Change Name] is displayed
and push the knob.
For further details on changing a name,
see page 244.
Delete
Push the talk switch and say [Delete], or
turn the “AUDIO CONTROL” knob until
[Delete] is displayed and push the knob.
For further details on deleting a phone,
see page 247.
If no phone has been registered, the sys-
tem may not function properly.
To set a passkey
1. Push the talk switch and say [Set
passkey], or turn the “AUDIO CON-
TROL” knob until [Set Passkey] is dis-
played and push the knob.
[Set Passkey. The passkey is required for
the phone pairing process. Push the talk
switch and say a new passkey.] is heard
and passkey is displayed.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob to
select a number.
When using a voice command:
[XXXX (new passkey) Push the talk switch
and say confirm. Otherwise, continue add-
ing numbers, or say go back or delete.]
is heard and the new passkey is dis-
played.
Follow voice guidance instructions, or turn
the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the knob.
[Passkey changed. Returning to the phone
setup.] is heard.
When using the knob:
1. Turn the “AUDIO CONTROL” knob to
select a number. Push the “AUDIO
CONTROL” knob to set.
2. When the passkey is set, push the
“AUDIO CONTROL” knob.
[Passkey changed. Returning to the phone
setup.] is heard.
The system does not function in the fol-
lowing cases:
# If the passkey has less than 4 digits.
# If the passkey has more than 8 digits.
To Next Page
Loading...
