’07 Rav4_U (L/O 0608)
258
2007 RAV4 from July ’06 Prod. (ON42621U)
When using the knob:
[Push the talk switch and say a new
name.] is heard.
1. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Record Name] is displayed, push the
knob and say new name.
[XXXX Push the talk switch and say con-
firm. Otherwise, say go back.] is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Name changed. Returning to the phone
book.] is heard and [Changed] is dis-
played.
The system may not function in the follow-
ing cases:
# If no name has been registered.
# If the system does not recognize the
voice command.
To set speed dial
1. Push the talk switch and say [Set
Speed dial], or turn the “AUDIO CON-
TROL” knob until [Speed Dial] is dis-
played and push the knob.
[Set speed dial. Push the talk switch and
say a name.] is heard.
2. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
the dial number that you want to regis-
ter is displayed and push the knob.
When using a voice command:
[XXXX (phone number) To register this as
a speed dial entry, push the talk switch
and say confirm. Otherwise, say go back.]
is heard and the phone number is dis-
played.
1. Follow voice guidance instructions, or
turn the “AUDIO CONTROL” knob until
[Confirm] is displayed and push the
knob.
[Push the preset button to assign to
XXXX] is heard.
2. Push and hold the desired preset but-
ton.
[preset... is now assigned. Returning to
the phone book.] is heard.
When using the knob:
[Push the preset button to assign to
XXXX] is heard.
Push and hold the desired preset button.
[preset... is now assigned. Returning to
the phone book.] is heard.
The system may not function in the follow-
ing cases:
# If no name has been registered.
# If the system does not recognize the
voice command.
To Next Page
Loading...
