EasyManua.ls Logo

Toyota 2007 Sequoia - Page 191

Toyota 2007 Sequoia
484 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
182
2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)
The A.D.D. can be engaged or disen-
gaged by the shifting operations des-
cribed in “(c) Shifting procedure.
You should drive in fourwheel drive for
at least 16 km (10 miles) each month.
This will assure that the front drive com-
ponents are lubricated.
SHIFTING BETWEEN 2WD” MODE AND
“4HI” MODE
To shift from 2WD mode to 4HI”
mode, reduce your speed to less than
100 km/h (62 mph) and press the
“2WD/4HI” switch.
If the 4HI indicator light flashes when
you press the “2WD/4HI switch, drive
straight ahead while accelerating or decel-
erating.
If the “4HI indicator light flashes and the
buzzer sounds when you press the
“2WD/4HI switch, reduce the vehicle
speed to less than 100 km/h (62 mph)
and press the switch again.
CAUTION
Never press the 2WD/4HI” switch if
wheels are slipping. Stop the slipping
or spinning before shifting.
To shift from 4HI mode to 2WD”
mode, press the “2WD/4HI switch again
to turn it off.
This can be done at any vehicle speed.
If the 4HI indicator light flashes when
you press the “2WD/4HI switch, drive
straight ahead while accelerating or decel-
erating, or drive in reverse.
SHIFTING BETWEEN 4HI” (UNLOCKED)
AND 4HI (LOCKED)
To shift from 4HI (UNLOCKED) to
“4HI” (LOCKED), press the center differ-
ential lock switch.
If the center differential lock indicator light
flashes when you press the center differ-
ential lock switch, drive straight ahead
while accelerating or decelerating.
CAUTION
Never press the center differential
lock switch if wheels are slipping.
Stop the slipping or spinning before
shifting.
07 05.22
(b) A.D.D. (automatic
disconnecting differential)
(c) Shifting procedure

Table of Contents

Related product manuals