Toyota 2007 Sequoia - Page 309

300
2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)
Ventilation
For best results, set controls to:
—For automatic operation
Press in the “AUTO” button.
Tem p er at ur e—Tow ar ds COLD
(to the left)
Air conditioning—OFF
—For manual operation
Fan speed—To the desired fan speed
Tem p er at ur e—Tow ar ds COLD
(to the left)
Air intake—FRESH (outside air)
Air flow—PANEL
Air conditioning—OFF
Defogging and defrosting
The inside of the windshield
For best results, set controls to:
—For automatic operation
Tem p er at ur e—Tow ar ds WARM
(to the right) to heat;
COLD (to the left)
to cool
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Lower vent—CLOSED
—For manual operation
Fan speed—To the desired fan speed
Tem p er at ur e—Tow ar ds WARM
(to the right) to heat;
COLD (to the left)
to cool
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Lower vent—CLOSED
Pressing the windshield air flow button
turns on the defogging function with the
purpose of clearing the front view.
When pressing the windshield air flow but-
ton, the air intake selects FRESH auto-
matically and fan speed may increase.
This is to clean up the front view more
quickly. It is not possible to return to RE-
CIRCULATE in this mode.
Press the “A/C” button for dehumidified
heating or cooling. This setting clears the
front view more quickly.
" On humid days, do not blow cold air
on the windshield—the difference be-
tween the outside and inside tempera-
tures could make the fogging worse.
The outside of the windshield
For best results, set controls to:
—For automatic operation
Tem p er at ur e—Tow ar ds WARM
(to the right)
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Lower vent—CLOSED
—For manual operation
Fan speed—To the desired fan speed
Tem p er at ur e—Tow ar ds WARM
(to the right)
Air intake—FRESH (outside air)
Air flow—WINDSHIELD
Lower vent—CLOSED
07 05.22