323
2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)
u19042
Place the transmitter with fastener square
facing inside of box into the box. Make
sure the transmitter button is located
above button pins.
u19043
Remove spacers from the center panel.
Place the largest spacer on the pin that
would be below transmitter button when
the cover is closed. Close the cover.
u19044
When the garage door opener transmitter
is properly installed, you can operate the
transmitter by pushing the center panel of
the cover.
07 05.22
To Next Page
Loading...
