n Avoiding 12-volt battery fires or explosions
Observe the following precautions to prevent accidentally igniting the flam-
mable gas that may be emitted from the 12-volt battery.
l Make sure each jumper cable is connected to the correct terminal.
l Do not allow the ends of the jumper cable used for the “+” terminals to
come into contact with any other parts or metal surface in the area, such
as brackets or unpainted metal.
l Do not allow the “+” and “-” terminals of the jumper cables to come into
contact with each other.
l Do not smoke, use matches, cigarette lighters or allow open flame near
the 12-volt battery.
n 12-volt battery precautions
The 12-volt battery contains poisonous and corrosive acidic electrolyte,
while related parts contain lead and lead compounds. Observe the following
precautions when handling the 12-volt battery.
l When working with the 12-volt battery, always wear safety glasses and
take care not to allow any battery fluids (acid) to come into contact with
skin, clothing or the vehicle body.
l Do not lean over the 12-volt battery.
l In the event that battery fluid comes into contact with the skin or eyes,
immediately wash the affected area with water and seek medical attention.
Place a wet sponge or cloth over the affected area until medical attention
can be received.
l Always wash your hands after handling the 12-volt battery support, termi-
nals, and other battery-related parts.
l Do not allow children near the 12-volt battery.
To Next Page
Loading...
