190
3-2. Using the audio system
n Scanning all radio stations within range
Press .
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press the button once
again.
XM
®
Satellite Radio* (if equipped)
n Re
ceiving XM
®
Satellite Radio
Press and select the XM
®
band.
The display changes as follows each time is
pressed.
AM → SA
T1 → SAT2 → SAT3
Turn to select the desired channel in the all catego-
ries or press “∧” or “∨” on to select the desired chan-
nel in the current category.
n Setting XM
®
Satellite Radio channel presets
Select the desired channel. Press and hold the button (from
to ) that the channel is to be set to until you hear a beep.
n Changing the channel category
Press “
∧” or “∨” on the .
n Scanning XM
®
Satellite Radio channels
l Scan
ning channels in the current category
Press .
When the desired channel is reached, press
again.
To Next Page
Loading...
