285
4-3. Do-it-yourself maintenance
4
Maintenance and care
21 AM1 25 A
Multiport fuel injection system/
sequential multiport fuel injection
system
n After a fuse is replaced
l If the
lights do not turn on even after the fuse has been replaced, a bulb
may need replacement. (→P. 286)
l If the replaced fuse blows again, have the vehicle inspected by your T
oy-
ota dealer.
n If there is an overloa
d in the circuits
The fuses are designed to blow before the entire wiring harness is damaged.
n To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
l Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
l Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
l Do not modify the fuse or the fuse box.
n Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toy-
ota dealer as soon as possible.
Fuse Ampere Circuit
To Next Page
Loading...
