176
2-1. Driving procedures
Changing shift ranges in S mode (multi-mode type)
When the shift lever is in the S position, the shift lever can be oper-
ated as follows:
Non-Optitron type meter
For upshifting
For downshifting
Optitron type meter
For upshifting
For downshifting
The initial shift range in S mode is set automatically to “4” according
to vehicle speed. However, the initial shift range may be set to “3” if
AI-SHIFT has operated while the shift lever was in the D position.
(→P. 1 7 7 )
■ Shift ranges and their functions
● You can choose from 5 levels of engine braking force.
● A lower shift range will provide greater engine braking force than
a higher shift range, and the engine speed will also increase.
To Next Page
Loading...
Need help?
General
