361
3-7. Other interior features
3
Interior features
AVALON_U (OM41428U)
n Programming the HomeLink
®
Point the remote control for the
device 1 to 3 in. (25 to 75 mm)
from the HomeLink
®
control but-
tons.
Keep the indicator light on the
HomeLink
®
in view while pro-
gramming.
Press and hold one of the
HomeLink
®
buttons and the
transmitter button. When the
HomeLink
®
indicator light
changes from a slow to a rapid
flash, you can release both but-
tons.
If the HomeLink
®
indicator light
comes on but does not flash, or
flashes rapidly for 2 seconds and
remains lit, the HomeLink
®
button
is already programmed. Use the
other buttons or follow the
“Reprogramming a HomeLink
®
button” instructions. (→P. 365)
To Next Page
Loading...
