365
3-7. Other interior features
3
Interior features
AVALON_U (OM41428U)
Operating the HomeLink
®
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
light on the HomeLink
®
transceiver should turn on.
The HomeLink
®
continues to send a signal for up to 20 seconds as long
as the button is pressed.
Reprogramming a HomeLink
®
button
Press and hold the desired HomeLink
®
button. After 20 seconds, the
HomeLink
®
indicator light will start flashing slowly. Keep pressing the
HomeLink
®
button and press and hold the transmitter button until the
HomeLink
®
indicator light changes from a slow to a rapid flash.
Release the buttons.
Erasing the entire HomeLink
®
memory (all three programs)
Press and hold down the 2 out-
side buttons for 10 seconds until
the indicator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
®
memory.
To Next Page
Loading...
