Toyota 2012 Auris - Displaying the Navigation Screen; Displaying Map Screen

175
1. BASIC INFORMATION BEFORE OPERATION
7
NAVIGATION SYSTEM
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
2. DISPLAYING THE NAVIGATION SCREEN
1 Press the “MAP/NAV” button.
 When the “MAP/NAV” button is pressed,
any of the navigation screens is displayed,
press the “MAP/NAV” button again.
2 Select “Confirm”.
 After about a few seconds, the caution
screen automatically switches to the map
screen.
DISPLAYING MAP SCREEN
INFORMATION
 Vehicles with a smart entry & start sys-
tem
 The caution screen will be displayed
when the screen is changed to the map
screen for the first time after the power
<engine> switch is turned to
ACCESSORY or ON <IGNITION ON>
mode.
 Vehicles without a smart entry & start
system
 The caution screen will be displayed
when the screen is changed to the map
screen for the first time after the engine
switch is turned to the “ACC” or “ON”
position.