Toyota 2012 Auris - Search Operation; Searching by Registered Points; Searching from Previous Destinations

194
3. DESTINATION SEARCH
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
2. SEARCH OPERATION
1 Display the “Navigation” menu screen
and select “My destinations”.
(P.176)
2 Select the “Stored” tab.
3 Select the desired entry.
 The route will be calculated.
1 Display the “Navigation” menu screen
and select “My destinations”.
(P.176)
2 Select the “Last” tab.
3 Select the desired entry.
 The route will be calculated.
SEARCHING BY
REGISTERED POINTS
To use this function, it is necessary to
register the entry. (P.216)
 Select to display and edit the
entry information. (P.222)
INFORMATION
 If “Home” has not been registered, a
message will be displayed and the
setting screen will automatically
appear. (P.217)
 Transferred POIs and routes from an
external device or the server will be
stored in this list. (P.220, 268)
 Transferred routes are marked by the
specific icon.
SEARCHING FROM
PREVIOUS DESTINATIONS
 Select to display and edit the
entry information. (P.222)
INFORMATION
 The list can contain a maximum of
100 entries. When the maximum is
reached, the oldest destination is
deleted, making room for the new des-
tination to be stored in the list.