Toyota 2012 Auris - Selecting an Audio Source; Inserting or Ejecting Adisc

27
1. BASIC OPERATION
2
AUDIO SYSTEM
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
1 Press the “MEDIA” button.
 The audio system turns on in the last
mode used.
2 Select or press the “MEDIA”
button to display the audio source se-
lection screen.
3 Select a desired audio source.
1 Insert a disc with the label side up.
 When a disc is correctly inserted into the
slot, the CD player will automatically start
playing from the first track or the first track
of the first folder on a disc.
SELECTING AN AUDIO
SOURCE
INFORMATION
 You cannot select dimmed screen but-
tons.
INSERTING OR EJECTING A
DISC
INSERTING A DISC
INFORMATION
 If the label is facing down, “Disc error
occurred” will appear on the screen.
NOTICE
 Never try to disassemble or oil any part
of the CD player. Do not insert anything
other than a disc into the slot.