Toyota 2012 Auris - RECEIVING CALLS on a Bluetooth; Phone

97
2. PHONE OPERATION
AURIS_HB_WGN_HV_Navi_EE
14.03.12 15:00
3
Bluetooth
®
HANDS-FREE SYSTEM
2. RECEIVING CALLS ON A Bluetooth
®
PHONE
1 Press the switch on the steering
wheel.
“Accept”: Select to talk on the phone.
“Reject”: Select to reject the call.
 The layout of the incoming call screen
may differ depending on the information
available from the connected phone.
 Pressing the switch on the steering
wheel also reject a call.
 Ringtone volume can be adjusted by turn-
ing the power/volume knob.
2 The following screen is displayed.
Single call
 For details about this screen: P. 98
Call waiting
 For details about this screen: P. 98
 The first call is put on hold and the infor-
mation of the party will be dimmed.
When a call is received, this screen is
displayed and a sound is heard.
INFORMATION
 The other party’s name or number may
not be displayed correctly depending on
the type of cellular phone you have.
 Ringtone and ringtone volume can also
be set. (P.152)
 Navigation system only: The contact’s
image will be displayed on the screen, if
an image from the phone is available. In
case no contact’s image is available, a
dummy image will be displayed.