135
2-2. Instrument cluster
2
When driving
Instrument panel light control
The brightness of the instrument panel lights can be adjusted by turn-
ing the dial.
Brighter
Darker
■ The meters and display operate when
The engine switch is in the “ON” position.
NOTICE
■ To prevent damage to the engine and its components
● On vehicles with a tachometer, do not let the indicator needle of the
tachometer enter the red zone, which indicates the maximum engine
speed.
● The engine may be overheating if the high engine coolant temperature
warning light flashes or comes on. In this case, immediately stop the vehi-
cle in a safe place, and check the engine after it has cooled completely.
(
→P. 334)
To Next Page
Loading...
