Toyota 2013 Camry - Page 320

327
3-5. Other interior features
3
Interior features
Operating HomeLink
®
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
light should come on.
The HomeLink
®
compatible transceiver in your vehicle continues to send
a signal for up to 20 seconds as long as the button is pressed.
Reprogramming a HomeLink
®
button
Press and hold the desired HomeLink
®
button. After 20 seconds, the
HomeLink
®
indicator light will start flashing slowly. Keep pressing the
HomeLink
®
button and press and hold the transmitter button until the
HomeLink
®
indicator light changes from a slow to a rapid flash.
Release the buttons.
Erasing the entire HomeLink
®
memory (all three programs)
Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
®
memory.