Toyota 2013 Highlander - Seating for up to Seven; Third-Row Access and Comfort

Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.com
Page 8"
Connect the included speaker to the speaker
extension harness.
Connect the speaker extension harness to the
navigation module.
Using the supplied cable ties, mount the navigation
speaker to the dashboard support brackets behind
and below the radio unit.
Using the supplied alcohol pad, throughly clean the
underside of the factory radio and navigation unit.
Once clean, press the supplied VHB tape firmly to
the bottom side of the navigation module.
Peel the protective layer from the VHB tape making
sure no debris comes into contact.