143
RAV4_OM_OM42809U_(U)
3-3. Adjusting the seats
3
Operation of each component
Driving position memory
∗
Check that the shift lever is in P.
Turn the engine switch to the “ON” position (vehicles without a
smart key system) or IGNITION ON mode (vehicles with a smart
key system).
Adjust the driver’s seat position.
While pressing the “SET” but-
ton, press button “1” or “2” until
the signal beeps.
If the selected button has already
been preset, the previously
recorded position will be overwrit-
ten.
∗: If equipped
Your preferred driving position (the position of the driver’s seat)
can be memorized and recalled by pressing a button. It is also
possible to set this function to activate automatically when the
doors are unlocked.
Two different driving positions can be entered into memory.
Entering a position to memory
1
2
3
4
To Next Page
Loading...
