64
1-1. For safe use
RAV4_OM_OM42809U_(U)
Adjust the seatback to the 8th
lock position from the fully
reclined position. (→P. 139)
Fully reclined position
8th lock position
If your child restraint system interferes with a head restraint and
cannot be installed properly, install the child restraint system after
removing the head restraint. (→P. 147)
Widen the gap between the seat cushion and seatback slightly.
X Type A
Latch the hooks of the lower
straps onto the LATCH
anchors.
If the child restraint has a top
tether strap, the top tether strap
should be latched onto the top
tether strap anchor.
For owners in Canada:
The symbol on a child restraint
system indicates the presence
of a lower connector system.
Installation with LATCH system
1
1
2
2
Canada only
3
To Next Page
Loading...
