125
3-3. Adjusting the seats
3
Operation of each component
COROLLA_TMMMS_TMMC_U (OM12F00U)
■ Removing the head restraints (except for fixed rear head restraints)
■ Installing the head restraints (except for fixed rear head restraints)
Front seats and rear outside seats
Rear center seat
■ Adjusting the height of the head restraints (except for fixed rear head
restraints)
■ Adjusting the rear center seat head restraint
Always raise the head restraint one level from the stowed position when
using.
Pull the head restraint up while pressing
the lock release button.
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Align the head restraint with the installa-
tion holes and push it down to the lowest
lock position while pressing the lock
release button.
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
To Next Page
Loading...
