286
5-7. Connecting Bluetooth
®
CAMRY_U (OM33A86U)
When auto connection has failed or “Bluetooth* Power” is turned off,
you must connect the Bluetooth
®
device manually.
Follow the steps in “Connecting a Bluetooth
®
device” from “STEP
1”. (P. 285)
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Registering an additional device
Select “Select Device” on the Bluetooth
®
audio control screen.
For more information: P. 2 8 3
Selecting a registered device
Select “Select Device” on the Bluetooth
®
audio control screen.
For more information: P. 2 8 5
■ Reconnecting a Bluetooth
®
phone
If the system cannot connect due to poor signal strength with the engine
switch in the “ACC” or “ON” position (vehicles without a smart key system) or
ACCESSORY or IGNITION ON mode (vehicles with a smart key system), the
system will automatically attempt to reconnect.
If the phone is turned off, the system will not attempt to reconnect. In this
case, the connection must be made manually, or the phone must be rese-
lected.
Manual connection
Connecting a Bluetooth
®
audio player
1
1
2
1
2
To Next Page
Loading...
