464
7-3. Do-it-yourself maintenance
HILUX_OM_OM0K196E_(EE)
Install the connector
Shake the bulb base gently to
check that it is not loose, turn
the headlight high beams on
once and visually confirm that
no light is leaking through the
mounting.
■
Front position lights/daytime running lights (if equipped)
(vehicles with halogen headlights)
Turn the bulb base counterclockwise.
Remove the light bulb.
When installing, reverse the steps listed.
5
1
X Vehicles without daytime
running lights
X Vehicles with daytime running
lights
2
X Vehicles without daytime
running lights
X Vehicles with daytime running
lights
3
HILUX_OM_OM0K196E_(EE).book Page 464 Thursday, February 12, 2015 6:59 PM