80
1-2. Child safety
HILUX_OM_OM0K196E_(EE)
◆ Installing child restraint system using a seat belt
Install the child restraint system in accordance to the operation
manual enclosed with the child restraint system.
X Front seat
Adjust the seatback angle to the most upright position. Move the
front seat fully rearward. (→P. 170)
When it is unavoidable to install a rear-facing child restraint sys-
tem on the front passenger seat, a child restraint system can be
installed if the PASSENGER AIRBAG OFF indicator lamp is lit.
If the head restraint interferes with your child restraint system,
and the head restraint can be removed, remove the head
restraint. Otherwise, put the head restraint in the upper most
position. (→P. 175)
X Rear seat
If the head restraint interferes with your child restraint system,
and the head restraint can be removed, remove the head
restraint. Otherwise, put the head restraint in the upper most
position. (→P. 175)
Run the seat belt through the child restraint system and insert the
plate into the buckle. Make sure that the belt is not twisted.
Securely fix the seat belt to the child restraint system in accor-
dance to the directions enclosed with the child restraint system.
If your child restraint system
is not equipped with a lock-
off (a seat belt locking fea-
ture), secure the child
restraint system using a lock-
ing clip.
After installing the child restraint system, rock it back and forth to
ensure that it is installed securely. (→P. 8 1 )
1
2
3
4
HILUX_OM_OM0K196E_(EE).book Page 80 Thursday, February 12, 2015 6:59 PM
To Next Page
Loading...
