436
8-2. Steps to take in an emergency
PRIUS c_U (OM52E68U)
Take out the towing eyelet. (P. 462)
Open the eyelet cover A using
a flathead screwdriver.
To protect the bodywork, place a
rag between the screwdriver and
the vehicle body as shown in the
illustration.
Open the eyelet cover B.
Insert the towing eyelet into the
hole and tighten partially by
hand.
Tighten down the towing eyelet
securely using a wheel nut
wrench.
Securely attach a cable or chain to the towing eyelet.
Take care not to damage the vehicle body.
Emergency towing procedure
1
2
3
4
5
6
To Next Page
Loading...
