366
3-2. Using the multimedia system
When registering/connecting a cellular phone
Symptom Likely cause Solution
A cellular phone
cannot be regis-
tered.
An incorrect passcode
was entered on the cellu-
lar phone.
Enter the correct pass-
code on the cellular
phone.
The registration opera-
tion has not been com-
pleted on the cellular
phone side.
Complete the registra-
tion operation on the cel-
lular phone (approve
registration on the
phone).
Old registration informa-
tion remains on either
this system or the cellular
phone.
Delete the existing regis-
tration information from
both this system and the
cellular phone, then reg-
ister the cellular phone
you wish to connect to
this system. (P. 360)
A Bluetooth
®
connection can-
not be made.
Another Bluetooth
®
device is already con-
nected.
Manually connect the cel-
lular phone you wish to
use to this system.
(P. 362)
Bluetooth
®
function is not
enabled on the cellular
phone.
Enable the Bluetooth
®
function on the cellular
phone.
“Please check
your device set-
tings.” message
is displayed.
Bluetooth
®
function is not
enabled on the cellular
phone.
Enable the Bluetooth
®
function on the cellular
phone.
Old registration informa-
tion remains on either this
system or the cellular
phone.
Delete the existing regis-
tration information from
both this system and the
cellular phone, then reg-
ister the cellular phone
you wish to connect to
this system. (P. 360)
To Next Page
Loading...
