381
3-2. Using the multimedia system
3
Interior features
■ When the contact is empty
You can transfer the phone numbers in a Bluetooth
®
phone to the
system.
Operation methods differ between PBAP (Phone Book Access
Profile) compatible and PBAP incompatible Bluetooth
®
phones. If
the cellular phone does not support either PBAP or OPP (Object
Push Profile) service, you cannot transfer contacts.
● For PBAP compatible Bluetooth
®
phones
When “Automatic Contact/History Transfer” is set to on (P. 394)
Select the “Contacts” tab.
Check that a confirmation screen is displayed when the oper-
ation is complete.
Transfer the contact data to the system using a Bluetooth
®
phone.
When “Automatic Contact/History Transfer” is set to off
Select the “Contacts” tab.
Select the desired item.
Select to transfer new con-
tacts from a cellular phone,
select “Always” and then
enable “Automatic Transfer”.
Select to transfer all the con-
tacts from a connected cellular
phone only once.
Select to cancel transferring.
Check that a confirmation screen is displayed when the oper-
ation is complete.
To Next Page
Loading...
