437
7-3. Do-it-yourself maintenance
7
Maintenance and care
CAMRY_HV_U (OM33C35U)
n
License plate lights
Remove the cover.
To prevent damaging the vehi-
cle, wrap the tip of the flathead
screwdriver with tape.
Remove the lens.
Put the flathead screwdriver
behind the tab of the lens, and
turn it as shown in the illustra-
tion to pry off the lens.
To prevent damaging the vehi-
cle, wrap the tip of the screw-
driver with tape.
Remove the light bulb.
When installing, reverse the steps listed.
n Replacing the following bulbs
If any of the lights listed below has burnt out, have it replaced by
your Toyota dealer.
l Parking lights/daytime running lights (LED type)
l High mounted stoplights
1
2
3
4
To Next Page
Loading...
