RAV4-HV_OM_OM42A56U_(U)
209
4-3. Operating the lights and wipers
4
Driving
■ Temporarily lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
Turn the power switch off while the following conditions are met.
• The headlight switch is in .
• The headlight switch lever is in high beam position.
Turn the power switch to ON mode.
Within 5 seconds after , repeat pulling the headlight switch lever to the
original position then pushing it to the high beam position quickly 9 times,
then leave the lever in high beam position.
Automatic High Beam (headlights) may turn on even the vehicle is stopped.
■ Customization
The Automatic High Beam can be turned off.
(Customizable features: P. 625)
1
2
3 2
To Next Page
Loading...
