373
3-5. Using the other interior features
3
Interior features
Test the operation of the HomeLink
®
by pressing the newly
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
®
buttons.
■ Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
■ Reprogramming a button
The individual HomeLink
®
buttons cannot be erased but can be
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
®
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
on the HomeLink
®
transceiver should turn on.
The HomeLink
®
continues to send a signal for a maximum of 20 seconds
as long as the button is pressed.
Reprogramming a HomeLink
®
button
Press and hold the desired HomeLink
®
button. After 20 seconds, the
HomeLink
®
indicator light will start flashing slowly. Keep pressing the
HomeLink
®
button and then follow the “Programming the HomeLink
®
(for U.S.A. owners)” instructions. (P. 370)
To Next Page
Loading...
