38
1-2. Opening, closing and locking the doors
■ Setting and canceling the functions
Vehicles with multi-information display
P. 181
Vehicles without multi-information display
To switch between setting and canceling, follow the procedure
below:
Close all the doors and turn the engine switch to the ON posi-
tion. (Perform step 2 within 20 seconds.)
Shift the shift lever to P or N,
press and hold the driver’s door
lock switch ( or ) for
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions corresponding to the
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
Function Shift lever position
Driver’s door lock
switch position
Shift position linked door locking
function
P
Shift position linked door unlock-
ing function
Speed linked door locking func-
tion
N
Driver’s door linked door unlock-
ing function
To Next Page
Loading...
