5
When trouble arises
491
5-2. Steps to take in an emergency
Install the tire and loosely tighten each wheel nut by hand by
approximately the same amount.
Tighten the nuts until the tapered
portion comes into loose contact
with the disc wheel.
Lower the vehicle.
Firmly tighten each nut two or
three times in the order shown in
the illustration.
Tightening torque:
154 ft·lbf (209 N·m, 21.3 kgf·m)
*
*
:When used on aluminum
wheel, apply 97 ft·lbf (131 N·m,
13.4 kgf·m)
Tapered portion
Disc wheel
To Next Page
Loading...
