Toyota 4Runner 2003 - Page 45

WWW.MANUALS.WS
WWW.MANUALS.WS
’03 4Runner_U (L/O 0305)
45
2003 4RUNNER from Apr. ’03 Prod. (OM35820U)
CAUTION
 Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
 After putting back the seat, try
pushing the seat and seatback for-
ward and rearward to make sure it
is secured in place. Be certain to
replace head restraint.
1. Remove the head restraint. Push the
seat position adjusting switch for-
ward to slide the seat further for-
ward than the front–most position.
2. Move the seatback angle adjusting
switch backward to flatten the seat-
back.
After returning the seat to its original
position, be certain to replace the head
restraint.
—Flattening seatbacks
(power seat)