Toyota 4RUNNER 2012 - Bottle holders

477
3-7. Other interior features
3
Interior features
4RUNNER_U
Referring to the map above, press the “MODE/ ” or “SET/
” button to select the number of the zone you are in.
Press and hold the “SET/ ” button to confirm the number
and to exit deviation calibration mode. (If the button is pressed
for more than 6 seconds, the number will automatically be
confirmed and the display returned to normal.)
Circling calibration
If “•” appears on the left side of
the direction display, circling cali-
bration needs to be performed.
Stop the vehicle in a place where it is safe to drive in a circle.
In deviation calibration mode
(→P. 476), press and hold the
“MODE/ ” button to change to
circling calibration mode.
“•” on the left side of the direction
display will blink.
STEP 3
STEP 4
STEP 1
STEP 2
Information Provided by: