491
3-7. Other interior features
3
Interior features
4RUNNER_U
Operating HomeLink
®
Press the appropriate HomeLink
®
button. The HomeLink
®
indicator
light should come on.
The HomeLink
®
compatible transceiver in your vehicle continues to send
a signal for up to 20 seconds as long as the button is pressed.
Erasing the entire HomeLink
®
memory (all three programs)
Press and hold the 2 outside but-
tons for 20 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
®
memory.
■ Before programming
● Install a new battery in the remote control transmitter.
● The battery side of the remote control transmitter must be pointed away
from the HomeLink
®
button.
To Next Page
Loading...
