5
When trouble arises
605
5-2. Steps to take in an emergency
4RUNNER_U
Taking out the spare tire
Assembling the jack handle.
Remove the jack handle and the jack handle extension bar from the
tool bag and assembly by following these steps.
Loosen the bolt and the screw
using either the jack handle or
a screwdriver.
Assemble the jack handle
extension bars and tighten the
bolt.
Check that the bolt is firmly tight-
ened.
Assemble the jack handle and
the jack handle extension bar
and tighten the screw.
Check that the screw is firmly
tightened.
STEP
1
CTH52AS051
CTH52AS052
CTH52AS053
To Next Page
Loading...
