Toyota AVALON 2005 - Changing to the Conventional (Fixed Speed) Control Mode; Each Mode Display; Displays in the Instrument Cluster

O017
 Each mode display
The control system in the vehicle- to- vehicle distance control
mode differs from the one in the conventional (fixed speed)
cruise control mode.
When using dynamic laser cruise control, make sure which
mode is selected.
00/06/06
In addition to the vehicle- to- vehicle distance control mode described in this quick reference guide, dynamic laser cruise
control has conventional (fixed speed) cruise control mode for cruising at fixed speeds. For the conventional (fixed speed)
cruise control mode, see Section 1- 7 in the “Owner’s Manual”.
Displays in the instrument cluster:
 Changing to the conventional (fixed speed) control mode
1
Push the main switch (“ON- OFF” button) to turn on the
system. The “CRUISE” and “READY” indicator lights in the
instrument cluster come on.
2
Push the control lever in the “MODE” direction for longer
than 1 second to change to conventional cruise control
mode. The “NORM.” indicator light in the instrument
cluster comes on.
O016
O012
O018 O019
O007
Vehicle- to- Vehicle Distance
Control Mode
Fixed Speed Control Mode
In Ready StateIn Control
AVALON (QRG_U)
− 9 −
2005 AVALON QRG from Jan. ’05 Prod. (OM41411U)
Information Provided by: