175
2-4. Using other driving systems
2
When driving
AVALON_U (OM41437U)
■ Dynamic laser cruise control warning lights, display and buzzers
Warning lights, display and buzzers are used to indicate a system malfunc-
tion or to alert you to the need for caution while driving.
The warning codes indicate the following.
If the same code appears again after implementing the correction procedure,
or if the cruise control cannot be set, contact your Toyota dealer.
Warning code Details Correction procedures
C1
Indicates that the laser
radar sensor is dirty or
covered with ice.
Clean the sensor.
C2
Indicates that the system
is unable to judge the vehi-
cle-to-vehicle distance.
• Stop the wiper or switch
the wiper to variable inter-
mittent operation.
• Avoid direct sunlight.
• Wait until the weather
becomes clear.
E3
(Flashing)
Indicates that a system
malfunction has been
detected.
Turn off and restart the
“ENGINE START STOP”
switch or the engine
switch.
To Next Page
Loading...
