257
3-3. Using the hands-free system (for cellular phone)
3
Interior features
AVALON_U (OM41437U)
Transferring a call
A call can be transferred between the cellular phone and system
while dialing, receiving a call, or during a call. Use one of the follow-
ing methods:
a. Operate the cellular phone.
Refer to the manual that comes with the cellular phone for the oper-
ation of the phone.
b. Press *
1
.
c. Press and say “Call Transfer”
*
2
.
*
1
: This operation can be performed only when transferring a call
from the cellular phone to the system during a call.
*
2
: While the vehicle is in motion, a call cannot be transferred from
the system to the cellular phone.
Using a call history memory
Follow the procedure below to use number stored in call history
memory:
Press and say “Redial” (when using a number stored in
the outgoing history memory) or “Callback” (when using a
number stored in the incoming history memory).
Select the number by either of the following methods:
a. Say “Previous” or “Go back” until the desired number is
displayed.
b. Select the desired number by using .
To Next Page
Loading...
