304
5-4. Other interior features
AVALON_HV_U (OM41457U)
■
Programming the HomeLink
Point the remote control for
the device 1 to 3 in. (25 to 75
mm) from the HomeLink
control buttons.
Keep the indicator light on the
HomeLink
in view while pro-
gramming.
Press and hold one of the
HomeLink
®
buttons and the
transmitter button. When the
HomeLink
®
indicator light
changes from a slow to a
rapid flash, you can release
both buttons.
If the HomeLink
®
indicator light
comes on but does not flash, or
flashes rapidly for 2 seconds
and remains lit, the HomeLink
®
button is already programmed.
Use the other buttons or follow
the “Reprogramming a
HomeLink
®
button” instructions.
(P. 308)
1
2
To Next Page
Loading...
