Conditions where BSM may not detect
Conditions where BSM may be inaccurate
Please read this manual for proper operation and keep it for future reference.
4/7
AVANZA - MAY - 2019 - 001
When under severe weather conditioning. Example: rain, fog, haze etc.
When vehicle lanes are narrow and a vehicle driving 2 lanes away from
your vehicle enters the detection area.
When driving up and down consecutive steep inclines, such as hills, dips
in the roads, etc.
When driving on roads with sharp bends, consecutive curves or uneven
surfaces.
Pedestrians, bicycles, small motorcycles or animals.
Vehicle travelling in the opposite direction.
Vehicle travelling two lanes away from user’s vehicle.
Vehicle which user’s vehicle had overtaken.
When mud, stickers, etc. is covering the sensor or attached to the rear
bumper.
When vehicle lanes are wide, and the vehicle in the next lane is too far
away from your vehicle.
To Next Page
Loading...
