Toyota Celica 2000 - Page 235

Celica_U
235
2000 CELICA (OM20735U)
2. Unplug the connector. Remove the
rubber cover.
If the connector is tight, wiggle it.
3. Release the bulb retaining spring
and remove the bulb along with the
socket. Install a new bulb into the
socket and return the bulb retaining
spring to its original position.
To install a bulb, align the tabs of the
bulb with the cutout of the mounting hole.
4. Install the rubber cover with the
“TOP” mark upward, and snuggle on
the boss. Insert the connector.
Make sure the rubber cover fits snugly on
the connector and the headlight body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.