2000 Corolla(U)
55
1. Separate the fastener tapes under
the right rear seatback and fold the
separated part of the seatback down
while lowering it.
2. Unlock and remove the head re-
straint, then reinstall it facing back-
ward.
CAUTION
When using the built- in child re-
straint, the head restraint must be
stored in reverse.
3. While pulling the seat belt release
strap (black), pull both shoulder
belts together.
Pull the seat belt release strap from
above at about 45angle to the child seat
cushion.
If the shoulder belts cannot be pulled out,
return the child seat cushion to an almost
closed position, firmly pull the seat belt
release strap and at the same time pull
both shoulder belts, then lower the child
seat cushion again.
To Next Page
