127
3-2. Opening, closing and locking the doors
3
Before driving
● If the switch on the lower
part of the power back door is
pressed by a hand which is hold-
ing an electronic key
● If the switch on the lower
part of the power back door is
pressed when the electronic key is
in a bag, etc. that is placed on the
ground
● If the switch on the lower
part of the power back door is
pressed with the electronic key
not near the vehicle
■ When reconnecting the 12-volt
battery
To enable the power back door to
operate properly, close the back
door manually.
■ If the back door opener is inop-
erative
The back door can be unlocked
from the inside.
1 Remove the cover.
To prevent damage, cover the tip of
the screwdriver with a rag.
2 Loosen the screw.
3 Turn the cover.
4 Move the lever.
5 When installing, reverse the
steps listed.
■ Customization
Settings (e.g. power back door
opening angle) can be changed.
(Customizable features: P.538)