191
4-2. Driving procedures
4
Driving
1 Operate the shift lever and
change the shift position to N
when the hybrid system is
operating.
2 Return the shift lever to its
regular position ( ).
3 Operate the shift lever to N
and hold it there until the
buzzer sounds.
4 Press the power switch within
5 seconds after the buzzer
sounds.
The hybrid system stops with the
shift position in N.
*
Make sure to check that the buzzer
sounds and “Holding N Push P
Switch When Done” is displayed on
the multi-information display.
In order to shift to a position
other than N, first press the P
position switch to change the
shift position to P.
Make sure to operate the shift
lever with the hybrid system is
operating.
If the hybrid system is not
operating, it may not be possi-
ble to hold the shift position in
N.
*
: To keep this state, do not operate
the power switch. If the power
switch is operated repeatedly, the
power switch will turn off after the
shift position has automatically
changed to P.
P.343
Selecting the driving
mode
To Next Page
Loading...
Need help?
General
