Toyota RAV4 2003 - Page 252

’03 Rav4_U (L/O 0208)
246
2003 RAV4 from Aug. ’02 Prod. (OM42517U)
“TOP” mark
3. Install the rubber cover with the
“TOP” mark upward, and fit it se-
curely on the boss. Plug in the con-
nector.
Make sure the rubber cover fits securely
on the bulb base and the mounting body.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
1. Loosen the retainer screw with a
Phillips−head screwdriver and take
out the front turn signal light unit.
2. Remove the front fog light unit.
—Front fog lights