167
40B013
Front Rear
2. Remove the towing eyelet cover on the
bumper using a flat−bladed screwdriver
which is wrapped with a cloth.
40B014
3. Secure the towing eyelet to the hole on
the bumper by turning clockwise.
40B015
4. Tighten the towing eyelet securely by
a wheel nut wrench.
CAUTION
When installing the eyelet on the ve-
hicle, be sure to tighten the eyelet
securely. If the eyelet is loose, it may
come off when being towed and re-
sult in death or serious injury.
To Next Page
Loading...
