422
3-5. Using the hands-free phone system (for cellular phone)
Displaying the Bluetooth
®
device address and name
Select “Device Name” using .
Turn to display the Bluetooth
®
device address and
name.
Select “Go Back” using to return to “System Setup”.
Initialization
Select “Initialize” and then “Confirm” by using .
Select “Confirm” by using .
■ Initialization
● The following data in the system can be initialized:
•Phone book
•Outgoing and incoming call history
•Speed dials
•Registered cellular phone data
•Security code
● Once the initialization has been completed, the data cannot be restored
to its original state.
■ When the phone book is locked
The following functions cannot be used:
● Dialing by inputting a name
● Speed dialing
● Dialing a number stored in the call history memory
● Using the phone book
To Next Page
Loading...
