111
3-2. Opening, closing and locking the doors
3
Operation of each component
SEQUOIA_OM_USA_OM0C013U_19MY
◆ Power back door switch
Press and hold the switch to open/
close the power back door.
A buzzer sounds and the back
door automatically opens and
closes.
Pressing the switch while the back
door is opening/closing stops the
operation.
When the switch is pressed again
during the halted operation, the
back door will perform the reverse
operation.
◆ Door lock switch
P. 1 0 5
◆ Back door opener
Raise the back door while
pushing up the back door
opener switch.
◆ Wireless remote control
P. 11 0
Opening/closing the back door from inside the vehicle (vehicles
with power back door)
Opening the back door from outside the vehicle
To Next Page
Loading...
